Digital Code

You’ve more than likely heard that today’s hearing aids are “not your grandfather’s hearing aids,” or that hearing aid technology is light-years ahead of where it used to be, even as recently as 5 to 10 years ago. But what makes today’s technologies so much better? And what exactly can modern hearing aids accomplish that couldn’t be achieved in the past?

The short answer is, like nearly all electronic devices, hearing aids have benefited considerably from the digital revolution. Hearing aids have transform into miniaturized computers, with all of the programming versatility you would expect from a modern computer.

But before hearing aids became digital, they were analog. Let’s see if we can understand why the shift from analog to digital was such an improvement.

Digital vs analog hearing aids

At the simplest level, all hearing aids function the same way. Each hearing aid contains a microphone, amplifier, speaker, and battery. The microphone detects sound in the environment, the amplifier strengthens the signal, and the speaker supplies the louder sound to your ear.

Fundamentally, it’s not very complex. Where is does get complex, though, is in the specifics of how the hearing aids process sound, which digital hearing aids accomplish far differently than their analog alternatives.

Analog hearing aids process sound in a very straightforward way. In three basic steps, sound is picked up by the microphone, amplified, and sent to the ear through the speaker. That is… ALL sound is made to be louder, including background noise and the sound frequencies you can already hear well. In other words, analog hearing aids amplify even the sounds you don’t want to hear — think of the scratching sound you hear from an analog recording on a vinyl record.

Digital hearing aids, on the other hand, apply a fourth step to the processing of sound: conversion of sound waves to digital information. Sound itself is an analog signal, but instead of just making this analog signal louder, digital hearing aids first convert the sound into digital form (saved as 0s and 1s) that can then be modified. Digital hearing aids, therefore, can CHANGE the sound before amplification by adjusting the information stored as a series of 0s and 1s.

If this seems like we’re talking about a computer, we are. Digital hearing aids are effectively miniature computers that run one customized application that manipulates and enhances the quality of sound.

Advantages of digital hearing aids

The majority of today’s hearing aids are digital, and for good reason. Given that analog hearing aids can only amplify incoming sound, and cannot change it, analog hearing aids very often amplify disruptive background noise, making it stressful to hear in noisy environments and nearly impossible to talk on the phone.

Digital hearing aids, on the other hand, have the versatility to amplify select sound frequencies. When sound is converted into a digital signal, the computer chip can recognize, distinguish, and store specific frequencies. For instance, the higher frequency speech sounds can be classified and stored separately from the lower frequency background noise. A hearing specialist can then program the computer chip to amplify only the high frequency speech sounds while suppressing the background noise — making it easy to follow conversations even in noisy locations.

Here are some of the other advantages of digital hearing aids:

  • Miniaturized computer technology means smaller, more discreet hearing aids, with some models that fit totally in the ear canal, making them nearly undetectable.
  • Digital hearing aids tend to have more attractive designs and colors.
  • Digital hearing aids can be programmed by a hearing specialist to process sound differently based on the setting. By changing settings, users can attain ideal hearing for a variety of scenarios, from a quiet room to a noisy restaurant to speaking on the phone.
  • Digital hearing aids can be fine-tuned for each patient. Each person hears different sound frequencies at different decibel levels. Digital hearing aids allow the hearing specialist to modify amplification for each sound frequency based on the properties of each person’s unique hearing loss.

Try digital hearing aids out for yourself

Reading about digital hearing aids is one thing, trying them out is another. But bear in mind, to get the most out of any pair of hearing aids, you need both the technology and the programming proficiency from an seasoned, licensed hearing specialist.

And that’s where we come in. We’ve programmed and fine-tuned countless hearing aids for individuals with all types of hearing loss, and are more than happy to do the same for you. Give us a call and experience the digital advantage for yourself!